Elektrik Elektronik Mühendisliği Bölümü

Permanent URI for this communityhttps://hdl.handle.net/20.500.12416/410

Browse

Now showing 1 - 10 of 10

Citation - WoS: 8
Citation - Scopus: 8
Analysis of Quantum Radar Cross-Section by Canonical Quantization Method (Full Quantum Theory)
(Ieee-inst Electrical Electronics Engineers inc, 2020) Salmanogli, Ahmad; Gokcen, Dincer
This article investigates the difference between two quantum-based theories to calculate the radar cross-section (RCS). Quantum radar cross-section (QRCS) has been commonly analyzed using the dipole approximation method, and the related results show that it can improve the sidelobe of the interference pattern in contrast to the classical methods. This study, on the other hand, utilizes the canonical quantization (or microscopic) method, which is a more comprehensive theory than the dipole approximation method to calculate the radar cross-section. It is shown that there are some similarities between two methods; nonetheless, there are some crucial quantities and factors that have been ignored in the dipole approximation methods. The main difference arises due to the interaction Hamiltonian that two methods relied on. The theoretical calculation shows some critical points suggesting that the dipole approximation method cannot cover all aspects of the radar cross-section calculation. To verify the mentioned point, we establish a new method in which the radar cross-section is calculated by merging the quantum approach with the method of moment (MoM), called quantum-method of moment (QMoM). The simulation results show that the newly established method is in harmony with the canonical quantization method.
Citation - WoS: 16
Citation - Scopus: 16
Entanglement Sustainability Improvement Using Optoelectronic Converter in Quantum Radar (Interferometric Object-Sensing)
(Ieee-inst Electrical Electronics Engineers inc, 2021) Salmanogli, Ahmad; Gokcen, Dincer
In this study, the main focus is laid on the design of an optoelectronic converter as a part of the quantum radar to enhance the entanglement between retained and returned modes at high temperatures. The electro-opto-mechanical converter has been widely studied, and the results showed that the operation at high temperature is so crucial to generate and preserve the entanglement between modes. The main problem arises because the mechanical part operating at a low frequency leads to a large number of thermally excited photons, and eventually, the entanglement between modes becomes lost. To solve the problem, we replace the mechanical part with the optoelectronic components. The optical cavity is coupled to the microwave cavity in the newly designed system through a Varactor diode excited by a photodetector. As the main goal, to improve the entanglement sustainability, the effect of the coupling factor of the microwave cavity to photodetector is investigated. The results show that the mentioned factor creates some degrees of freedom to enhance the entanglement at high temperatures compared to the electro-opto-mechanical converter. At some specific values of the coupling factor, the retained and returned fields remained completely entangled up to 5.5 K and partially entangled around 50 K.
Citation - WoS: 9
Citation - Scopus: 13
Fiber-Coupling Efficiency of Laser Array Beam From Turbulent Atmosphere To Fiber Link
(Ieee-inst Electrical Electronics Engineers inc, 2023) Baykal, Yahya; Ata, Yalcin; Gokce, Muhsin Caner
Free-space optical communication (FSOC) systems are nowadays integrated with fiber optical components developed for fiber-optic communications. In such integrated systems, the collected portion of the incident beam on the receiver lens is coupled into a single-mode fiber. The process of coupling, however, is mostly affected by the atmospheric turbulence which distorts the coherency of the propagating beam i.e., it results in speckle over the coupling lens causing a reduction in the coupling efficiency. In this article, we aimed at investigating the fiber coupling efficiency of laser array beams propagating in a turbulent atmosphere. For this purpose, using the Huygens-Fresnel principle, mutual coherence function (MCF) for a laser array beam incidence is formulated. In this way, the average power coupled into the fiber and the average received power on the coupling lens are derived for a laser array beam incidence. It is found that the fiber coupling efficiency clearly increases with the increase in ring radius and the number of Gaussian beams in the array and rapidly decreases with increasing structure constant of atmosphere, link distance, and the number of speckles over the receiver aperture. We also demonstrate the effect of various FSOC system parameters on the coupling efficiency.
Citation - WoS: 12
Citation - Scopus: 12
Intensity Fluctuations of Laser Array Beams in Non-Kolmogorov Turbulence
(Ieee-inst Electrical Electronics Engineers inc, 2015) Gercekcioglu, Hamza; Baykal, Yahya
On-axis intensity fluctuations of laser array beams are evaluated when they are used in a weakly turbulent non-Kolmogorov atmosphere. Our formulation of the scintillation index is based on the Rytov method, which in the limiting case, correctly reduces to the known Gaussian beam scintillation index in weak Kolmogorov turbulence. When the radius of the ring (on which the array beamlets are placed), number of beamlets forming the laser array, source size of the beamlets, propagation distance or the wavelength is fixed, a decrease in the power law exponent of the non-Kolmogorov spectrum is found to decrease the scintillation index. Examining for any realization of the non-Kolmogorov spectrum, it is observed that an increase in the ring radius, number of beamlets, wavelength, and decrease in the source size of the beamlet, propagation distance reduces the intensity fluctuations.
Citation - WoS: 21
Citation - Scopus: 21
Multimode Laser Beam Scintillations in Non-Kolmogorov Turbulence
(Ieee-inst Electrical Electronics Engineers inc, 2015) Baykal, Yahya
Employing the Rytov solution, the scintillation index at the origin of the receiver plane is evaluated in non-Kolmogorov weak atmospheric turbulence when multimode laser incidence is used. The solution presented can be used when the multimode is composed of even modes. The novelty of this work lies in the theoretical combination of multimode laser beam excitation and non-Kolmogorov turbulence in the scintillation evaluations, which is not known both theoretically and experimentally. The study involves mathematical rigor but no experimental results. Being valid for any power law exponent of the non-Kolmogorov turbulence, the scintillations of the multimode beams are found to be smaller than the scintillation index of a single Gaussian beam. For the multimode laser beam excitation, the scintillation index is smaller at smaller power law exponent values. If the multimode content is formed by beams with larger mode numbers, the scintillations decrease for any non-Kolmogorov realization. When large sized beams are used in the multimode, the scintillations increase as compared to small sized content, and the scintillations become almost the same as the Gaussian beam scintillations. Comparing the multimode structures that have the same number of beams, the ones with higher order modes yield smaller scintillations, and for such multimode structures, very similar scintillation index behaviour versus the power law exponent can be obtained by varying the amplitudes of the modes composing the multimode. The main contribution of this paper is the formulation and evaluation of the scintillation noise in order to understand whether the use of multimode laser excitation will improve the link performance of optical wireless communication systems operating in a non-Kolmogorov atmosphere.
Citation - WoS: 6
Citation - Scopus: 7
Optical and Microcavity Modes Entanglement by Means of Plasmonic Opto-Mechanical System
(Ieee-inst Electrical Electronics Engineers inc, 2020) Salmanogli, Ahmad; Gecim, H. Selcuk
In this study, plasmonic opto-mechanical tripartite system is proposed to improve the performance of the traditional tripartite opto-mechanical system. In the new design, significantly, optical cavity and microwave cavity modes are directly coupled to each other. The originality of this work consists in embedding a microsphere in the optical cavity where the plasmon-plasmon interaction between the metal plates generates a plasmon mode inside the optical cavity and changes the electric field distribution. The plasmonic property influences the microsphere electrical properties and interacts with the photonic mode inside the optical cavity by which the microwave cavity properties are also affected through coupling to the optical cavity. Microsphere introduces a capacitor as a function of plasmonic properties that can strongly influence the microwave cavity resonance frequency. That is the feature that we want to utilize to enhance the performance of the system at high temperature. The results show that the optical cavity and microwave cavity modes remain entangled at high temperature. It is contributed to the plasmonic-based capacitor induced by the microsphere which is not affected by the thermally induced photons (noise). It is worth mentioning that the induced noise strongly restricts the traditional tripartite system operated with a wide bandwidth.
Citation - WoS: 5
Citation - Scopus: 5
Plasmonic Effect on Quantum-Dot Photodetector Responsivity
(Ieee-inst Electrical Electronics Engineers inc, 2019) Salmanogli, Ahmad; Gokcen, Dincer; Gecim, H. Selcuk
In this paper, we analyze and simulate the plasmonic effect on the quantum-dot photodetector responsivity. For this purpose, a plasmonic-based quantum-dot photodetector is designed in which a few quantum dots are embedded in the hot-spot regions of the plasmonic nanoparticles, wherein a high-intensity localized field is created. Notably, due to the maximum overlapping of the plasmonic field with the quantum dots at the hot spot, some of the optical characteristics of the quantum dot, particularly the spontaneous emission decay rate, are changed. This paper focuses on the engineering of the decay rate, through which we found that the quantum-dot photodetector responsivity is strongly enhanced with the order of 100 times at the visible range. For analyzing the proposed system, we first work on the plasmonic effect of the nanoparticle on the quantum-dot lifetime using the Heisenberg-Langevin equations. It is shown that by embedding the quantum dots at the hot spot of the nanoparticle, the decay rate of the quantum dot is dramatically influenced. In the following, plasmonic-quantum dot system responsivity is theoretically examined using a time-varying perturbation theory. Using this approach is necessary because the spontaneous emission cannot be analyzed with the classical methods. Consequently, it is proved that using plasmonic effect leads to enhanced photodetector responsivity, suggesting that even very small incoming signals are detectable.
Citation - WoS: 7
Citation - Scopus: 7
Plasmonic System as a Compound Eye: Image Point-Spread Function Enhancing by Entanglement
(Ieee-inst Electrical Electronics Engineers inc, 2018) Salmanogli, Ahmad; Gecim, H. Selcuk; Piskin, Erhan
In this paper, we introduce a plasmonic system that can operate as a compound eye. Based on the advantages mentioned in some previous works for the compound eye, we designed a plasmonic system that contains faraway plasmonic nanoparticles (NPs) that act independently like an ommatidium in the compound eye. This plasmonic system performance is analyzed with full quantum theory by which it is theoretically proved that with the interaction of light with NPs, the scattering light, and generated phonon can be entangled due to the NPs Ohmic loss. Consequently, the quantum states of the system before, after, and during the absorption and scattering of the incident photon, were quantum mechanically subjected. By the introduced theoretical formula and modeling results, it is shown that the plasmonic system can operate similar to the compound eye, if the critical parameters, such as system's focus point, NPs scattering angle, and inter-distance between NPs are suitably designed. More importantly, due to the entanglement between the scattering light and the generated phonon, it is theoretically proved that the point-spread function is improved when the traditional lens in the compound eye is replaced by the plasmonic NPs leading to an enhanced image resolution. Finally, a simple conceptual design of the plasmonic system is presented and then a few contributed modeling results are introduced.
Citation - WoS: 4
Citation - Scopus: 6
Scintillation of Laser Beams in Weak Atmospheric Turbulence for Aerial Vehicle in the Use of Lidar
(Ieee-inst Electrical Electronics Engineers inc, 2022) Baykal, Yahya; Gercekcioglu, Hamza
Formulation of on-axis scintillation of laser beams is found in weak atmospheric turbulence for aerial vehicle in the use of light detection and ranging (LIDAR) systems by employing the Rytov method. The formulation derived for collimated Gaussian, plane and spherical beams is evaluated in vertical link involving up/down link. In this medium, the behavior of these beams in terms of deterioration is examined. In this context, the on-axis scintillation index values are plotted versus normalized target size parameter, target size, source size, propagation distance and zenith angle, and the results are obtained for LIDAR systems operating for aerial vehicle in vertical atmospheric link by using ground/space transceiver. The degradation is greater in operating with ground transceiver than in operating with space transceiver. Additionally, while the on-axis scintillation index is minimized in the smaller target size in use of ground transceiver than in use of space transceiver, that is, it can also be minimized in the larger target size in use of space transceiver. The values of source size and the normalized target size parameter minimizing the obtained scintillation index, are 1.2 cm, 10, and 6 cm and 5 for ground transceiver and space transceiver, respectively.
Citation - WoS: 16
Citation - Scopus: 15
Transmittance of Multi Gaussian Optical Beams for Uplink Applications in Atmospheric Turbulence
(Ieee-inst Electrical Electronics Engineers inc, 2015) Ata, Yalcin; Baykal, Yahya
On-axis slant path uplink transmittance (used in short as transmittance throughout the text) for multi Gaussian optical beam in Kolmogorov atmospheric turbulent medium is investigated. It is observed that for both the flat-topped and the annular beams, as the propagation distance, wind speed and the zenith angle increase, the transmittance decreases. The transmittance of flat-topped beams increases when the number of beams, source size or the wavelength increases. For the annular beam, when the outer/inner beam size ratio is kept constant, larger source sizes yield larger transmittance values. Transmittance of the thicker annular beams is found to be larger than the transmittance of the thinner annular beams.

Browse

Browsing Elektrik Elektronik Mühendisliği Bölümü by browse.metadata.publisher "Ieee-inst Electrical Electronics Engineers inc"