İnşaat Mühendisliği Bölümü Yayın Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/395

Browse

Now showing 1 - 20 of 27

Citation - WoS: 8
Citation - Scopus: 17
An Analysis on the Relationship Between Safety Awareness and Safety Behaviors of Healthcare Professionals, Ankara/Turkey
(Oxford Univ Press, 2020) Uzuntarla, Fatma; Kucukali, Serhat; Uzuntarla, Yasin
Objectives: This descriptive study aims to examine the relationship between the safety awareness of healthcare professional and their safety behaviors. Methods: The study was carried out on 418 healthcare professionals working in a training and research hospital in Ankara/Turkey. The survey method was used as data collection tool. The questionnaire consisted of 3 sections and 18 questions. First section consisted of questions on sociodemographic characteristics and, second section consisted of the awareness scale and third section consisted of safety behaviors scale. Results: The safety awareness and safety behaviors are scored on a scale from 1 (completely disagree) to 5 (completely agree). The safety awareness and safety behaviors has an average score of 3.85 +/- 0.81 and 3.56 +/- 0.82, respectively. The safety awareness and safety behavior levels of healthcare professionals were found to be high. Conclusion: A significant positive correlation was found between safety awareness and safety behaviors and it was concluded that the increase in safety awareness led to an increase in safety behavior.
Citation - WoS: 22
Citation - Scopus: 26
Behavior of Glulam Timber Beam Strengthened With Carbon Fiber Reinforced Polymer Strip for Flexural Loading
(Sage Publications Ltd, 2021) Isleyen, ummu K.; Ghoroubi, Rahim; Mercimek, Omer; Anil, Ozgur; Erdem, Recep Tugrul
In the last 20 years, the use of wooden structures and their dimensions have gradually increased. The wood application has increased in different structures such as multistory buildings, sports, industrial facilities, road and railway bridges, power transmission lines, and towers. The widespread use and size of wood structures have increased the research on developing special types of wood products supported by composite materials. Laminated wood elements are the leading composite wood materials. Laminated wooden beams allow making much larger openings than standard solid wood structural elements. The development of the sizes and usage areas of wooden structures has increased the capacity of glulam structural elements and reveals the need to improve their performance. Carbon fiber reinforced polymers (CFRPs) are the most suitable options for increasing the bearing capacity values of glulam beams and improving general load-displacement behaviors. In this study, the use of CFRP strips in different layouts to increase glulam wooden beams and the application of CFRP fan-type anchors in the CFRP strip endpoints are the studied variables. Anchored and non-anchored glulam wooden beams reinforced with CFRP strips with different layouts were tested using a three-point bending test. The ultimate load capacity, initial stiffness, displacement ductility ratio, energy dissipation capacity, failure mechanisms, and general load-displacement behavior of wooden beam test specimens were obtained and interpreted as a result of the experiments.
Citation - WoS: 4
Citation - Scopus: 4
Behaviour of Steel Beams Retrofitted With Anchored Carbon-Fibre Polymer Strips
(Ice Publishing, 2022) Mercimek, Omer; Ghoroubi, Rahim; Baran, Mehmet; Anil, Ozgur
Steel bridge beams can be damaged due to increased traffic loads and environmental impacts. An experimental study on the use of bonded and mechanically anchored carbon-fibre-reinforced polymer (CFRP) strips was undertaken to assess the retrofitting of such steel beams. The number of mechanical anchors used in the ends of the bonded strips was varied from zero to eight. The steel beam samples were tested under four-point loading. Loading was applied as an increasingly high static load and a low repetitive fatigue load. The load-displacement behaviour under the effects of static and fatigue loading and the strain distributions along the strips were measured and interpreted. The results showed that retrofitting cracked steel beams with CFRP strips is an effective method. In addition, retrofitting with anchored strips increased the performance of cracked beams under the effects of both static and fatigue loading.
Closure to "local Scour at Triangular Labyrinth Side Weirs Located on an Alluvial Channel" by Mustafa Tunc, Muhammet Emin Emiroglu, and Mustafa Gogus
(2023) Tunç, Mustafa; Emiroğlu, Muhammet Emin; Göğüş, Mustafa
Citation - WoS: 8
Citation - Scopus: 8
Dynamic Shear Force Amplification in Regular Frame-Wall Systems
(Wiley-blackwell, 2016) Kazaz, Ilker; Gulkan, Polat
A parametric study is conducted to investigate the dynamic shear amplification factor (DAF) in low-to-mid-rise frame-wall systems in which the reinforcement curtailment along the height matches the required code strength. The level of frame-wall interaction is varied by changing the wall index, defined as the ratio of the total wall area to the floor plan area, in a generic frame-wall system, and its correlation with the DAF is investigated. Wall index values ranging in the 0.2% to 2% interval are selected. Walls with lengths of 3m, 5m and 8m are used in the design of model buildings of 4, 8 and 12 stories. Shear-flexure beam continuum formulation is used in design and modeling. The global behavior is analyzed using nonlinear response history procedure using spectrum compatible ground motions. It is found that the primary source of amplification is the level of inelastic demand on the system. Walls designed for code-specified force reduction factor R=6 experienced an average base shear force amplification in the order of 1.64 with standard deviation of 0.19 with respect to design shear force. Amplification diminishes with decreasing R. An expression for the dynamic amplification factor as a function of the number of stories and force reduction factor R is proposed. Copyright (C) 2015 John Wiley & Sons, Ltd.
Citation - WoS: 1
Citation - Scopus: 1
Dynamics of a Beam-Column Element on an Elastic Foundation
(Canadian Science Publishing, Nrc Research Press, 2016) Alemdar, Bulent N.; Gulkan, Polat H.; Dinckal, Cigdem
An exact analytical solution of a harmonically vibrating beam-column element resting on an elastic Winkler foundation is derived. The solution covers four cases comprised of constant compressive or tensile axial force with the restrictions k(s) - m omega(2) < 0 and k(s) - m omega(2) > 0. The proposed solution is not restricted to a particular range of magnitudes of the foundation parameter. Closed form solutions of dynamic shape functions are explicitly derived for each sub-case to obtain frequency-dependent dynamic stiffness terms that constitute the exact dynamic stiffness matrices. Four numerical examples are provided to demonstrate the merits of the present study.
Citation - WoS: 22
Citation - Scopus: 22
Effect of Anchorage Number and Cfrp Strips Length on Behavior of Strengthened Glulam Timber Beam for Flexural Loading
(Sage Publications inc, 2021) Isleyen, Ummu Karagoz; Ghoroubi, Rahim; Mercimek, Omer; Anil, Ozgur; Togay, Abdullah; Erdem, R. Tugrul
Laminated wooden beams are more preferred in the production of wooden structures than solid timber beams because they have a higher load-carrying capacity and allow larger openings to be used in the structure. The widespread use of wooden structures and the increasing size of the structures have revealed the need for strengthened laminated wooden beams and increase their ultimate load capacity. It has become necessary to develop reinforcement details to increase the ultimate load capacity of laminated wooden beams in wooden railroads or highway bridge beams, where the traffic load increases, especially in large wooden structures, in cases where large openings must be passed. Within the horizon of the study, the behavior and performance of three-layer glulam wooden beams strengthened with anchorage and non-anchorage CFRP strips with different bonding length under flexural loading were investigated experimentally. The three-point bending test was applied to glulam timber beam test specimens produced by laminating yellow pine wood material using the polyurethane adhesive. General load-displacement behaviors, ultimate load capacity, initial stiffness, displacement ductility ratios, and energy dissipation capacities were obtained. The increase in the bonding length of the CFRP strips used for strengthening in the glulam timber beam specimens and the use of CFRP fan type anchors at the strip ends increased the ultimate load capacity and initial stiffness values of the wooden beams, as well as the displacement ductility ratios and energy dissipation capacity values.
Citation - WoS: 9
Citation - Scopus: 10
Effect of Collars on the Downstream Movement of the Maximum Scour Depth Location Around Bridge Abutments and Piers
(Springer int Publ Ag, 2022) Kumcu, Serife Yurdagul; Kokpinar, Mehmet Ali; Gogus, Mustafa
A detailed investigation has been conducted to study the shift location of the point of the maximum scour depth for both bridge abutment-collar and pier-collar arrangements. In the present study, an experimental program has been conducted for abutment-collar arrangements and additionally, the data obtained from the literature for the pier-collar arrangements have been revisited and analyzed to complement the framework of this study. For the abutment-collar arrangements, a series of experiments under clear-water conditions were carried out for different abutment lengths with fixed values of collar location and collar width. For pier-collar arrangements, data used from the literature have been involved constant pier diameter with various collar sizes at various elevations. To describe the locations of these maximum scour depths, their coordinates with respect to the location of the abutment or the pier were obtained. Results from this investigation showed that when a collar placed on or below the bed level was used as a countermeasure against scouring, either on an abutment or on a pier, it was observed that the maximum scour depth was routed downstream of the bridge structure.
Citation - WoS: 2
Citation - Scopus: 2
Effect of Particle Size on Flip Bucket Scour
(Canadian Science Publishing, Nrc Research Press, 2016) Kucukali, Serhat; Kokpinar, Mehmet Ali
This study quantifies the dimensionless maximum scour depth d(s)/D-50 downstream of flip buckets as a function of the square of the densimetric Froude number Fr-d(2), jet Reynolds number Re, lip angle, and sediment non-uniformity constant. The proposed formula is valid for Fr-d = 2.9-29.69, Re = 8.9 x 10(3)-4.2 x 10(5), and We > 32. Moreover, the scour profiles for different sediment sizes (D-50 = 3-17 mm) are presented from the Kigi Dam physical model and the effect of the Reynolds number on scour process is discussed. The prediction capacity of the proposed formula is compared with the existing empirical formulas in the literature and it is shown that the proposed dimensionally homogenous formula made better estimations. The procedure described here has a sound physical basis and it can be used to estimate the maximum scour depth downstream of flip buckets.
Citation - WoS: 17
Citation - Scopus: 20
Effect of Sm on Crystallization Kinetics of Cu-Zr Metallic Glasses
(Elsevier, 2020) Sikan, F.; Polat, G.; Kalay, I.; Kalay, Y. E.
The effect of Sm micro-alloying on non-isothermal and isothermal crystallization kinetics of (Zr50Cu40Al10)(100-x)Sm-x (x = 0, 2, 4 at. % Sm) alloys were investigated using differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Crystallization activation energies for each composition were calculated in non-isothermal conditions using Kissinger and Ozawa methods and in isothermal conditions using Johnson-Mehl-Avrami model. XRD analysis showed that crystallization product Cu10Zr7 changes to Cu2Sm with Sm presence in isothermal conditions. Both isothermal and isochronal calculations yield that the energy barrier for crystallization has increased with Sm addition. On the other hand, crystallization point drops to lower temperature at the expense of an increase in the pre-exponential factor. The Avrami exponents for all compositions were found to be below 2.5, indicating that crystallization was governed by a diffusion-controlled three-dimensional growth with a decreasing nucleation rate. The apparent increase in crystallization activation energies with increasing Sm content can be one of the affecting factors for commonly held idea of increased glass forming ability for rare-earth containing Zr-based metallic glasses.
Effective intake for critical submergence in the case of more than one intake
(2017) Taştan, Kerem; Yıldırım, Nevzat
The available potential flow solution methods over-estimate the number of effective intake for the prediction of critical submergence in the case of multiple intakes of identical level without partition walls located on the longitudinal line of the canal, because they cannot establish an upper limiting value for the distance between the centers of the intakes. To address this, tests were conducted on dual intakes of identical level located on the longitudinal line of the canal in a cross-flow. In practice, by means of the chart obtained from the experimental results, one can determine the upper limiting value of the distance between the centers of dual intakes beyond which the effect of the intake on the critical submergence of the other intake is negligible. Such an intake is considered a non-effective intake and is disregarded in the prediction of critical submergence. In addition, the effective intake relating to multiple intakes sited in a still-water reservoir is explained.
Citation - WoS: 32
Citation - Scopus: 37
Environmental Risk Assessment of Small Hydropower (Shp) Plants: a Case Study for Tefen Shp Plant on Filyos River
(Elsevier Science Bv, 2014) Kucukali, Serhat
A multi-criteria scoring tool is used to assess the environmental risk level of small hydropower plants on the basis of documented evidence, measured data, and on-site observations. The assessment is based on evaluating compliance with the standards of the European Bank for Reconstruction and Development (EBRD). The following environmental criteria are assessed: environmental flow, water quality, fish passage and protection, watershed protection, threatened and endangered species. I evaluated the Tefen hydropower plant, which has been in operation on the Filyos River in northwestern Turkey since 2011. The assessment showed that the plant failed all of the EBRD criteria. (C) 2013 International Energy Initiative. Published by Elsevier Inc. All rights reserved.
Citation - WoS: 14
Citation - Scopus: 15
Experimental and Numerical Investigation of Rc Column Strengthening With Cfrp Strips Subjected To Low-Velocity Impact Load
(Techno-press, 2021) Mercimek, Omer; Anil, Ozgur; Ghoroubi, Rahim; Sakin, Shaimaa; Yilmaz, Tolga
Reinforced concrete (RC) square columns are vulnerable to sudden dynamic impact loadings such as the vehicle crash to the bridges of highway or seaway, rock fall, the collision of masses with the effect of flood and landslide. In this experimental study RC square columns strengthened with and without CFRP strip subjected to sudden low velocity lateral impact loading were investigated. Drop-hammer testing machine was used to apply the impact loading to RC square columns. The test specimens were manufactured with square cross sections with 1/3 geometric scale. In scope of the study, 6 test specimens were manufactured and tested. The main variables considered in the study were the application point of impact loading, and CFRP strip spacing. A 9.0 kg mass was allowed to fall freely from a height of 1.0 m to apply the impact loading on the columns. During the impact tests, accelerations, impact force, column mid-point displacements and CFRP strip strains measurements were taken. The general behavior of test specimens, collapse mechanisms, acceleration, displacement, impact load and strain time relationships were interpreted, and the load displacement relationships were obtained. The data from the experimental study was used to investigate the effect of variables on the impact performances of RC columns. It has been observed that the strengthening method applied to reinforced concrete columns, which are designed with insufficient shear strength, insufficient shear reinforcement and produced with low strength concrete, using CFRP strips significantly improves the behavior of the columns under the effect of sudden dynamic impact loading and increases their performance. As a result of the increase in the hardness and rigidity of the specimens strengthened by wrapping with CFRP strips, the accelerations due to the impact loading increased, the displacements decreased and the number of shear cracks formed decreased and the damage was limited. Moreover, the finite element analyses of tested specimens were performed using ABAQUS software to further investigate the impact behavior.
Citation - WoS: 1
Citation - Scopus: 1
Experimental Study on the Interaction Between Bridge Pier and Abutment Concerning Clear-Water Local Scour
(Springer int Publ Ag, 2023) Akbulut, Omer Faruk; Kokpinar, Mehmet Ali; Gogus, Mustafa
Estimation of scour depth around bridge piers and abutments is essential for safety and economic design in alluvial rivers. Although local scour around bridge piers and abutments has been studied separately by a large number of investigators, there is limited research on the literature related to the interaction between these two structures. Hence, in this study, the aim is to investigate the interaction between bridge abutments and pier scours in detail. For this reason, bridge abutments of different lengths of La = 0.05, 0.10, and 0.15 m and a pier with diameter of D = 0.1 m were placed at various distances from each other in a long sediment channel and tested under clear-water flow conditions with constant flow intensity. All the important dimensionless parameters involved in the interaction phenomenon were derived from theoretical analysis, and the relationships between them were investigated. Analysis of the data showed that the presence of a pier in the flow medium in addition to an abutment has a certain amount of influence on the formation of scour holes around the structures. The influence of the abutment on the pier was more noticeable in the current study, particularly for longer abutments, leading to average increases of up to 20% in scour depth around the pier. The study's findings revealed that the presence of both a pier and an abutment in the flow medium exerted a discernible, unfavorable influence on the development of scour holes, particularly around piers.
Citation - WoS: 7
Citation - Scopus: 11
A Finite Grid Solution for Circular Plates on Elastic Foundations
(Korean Society of Civil Engineers-ksce, 2015) Karasin, Halim; Gulkan, Polat; Aktas, Gultekin
The transmission of vertical or horizontal structural forces to the supporting soil is a challenge to analyze for structures on elastic foundation which represent a complex medium. The two-parameter elastic foundation model that provides a mechanical interaction between the individual spring elements shows a more realistic behavior of the soil reaction than does the single parameter Winkler model. Since the structural behavior of a beam resembles that of a strip in a plate, in this study, the exact stiffness and mass matrices of the beam element on two-parameter elastic foundation is extended to plates. The framework method that replaces a continuous surface by an idealized discrete system can represent a two-dimensional plate. In the light of this situation, circular plates are modeled as an assemblage of individual beam elements interconnected at their neighboring joints in radial and tangential direction. So, a useful tool called finite grid solution as a numerical method developed in this study lead to solve circular plates resting on two parameter elastic foundation problems. Examples for bending of ring, circular and annual plates on elastic foundation are solved to compare with known analytical solutions and other numerical solutions. The comparisons show that the literature and the computed results are compatible.
Citation - WoS: 13
Citation - Scopus: 15
Flow Structure and Fish Passage Performance of a Brush-Type Fish Way: a Field Study in the Yidere River, Turkey
(Csiro Publishing, 2019) Kucukali, Serhat; Verep, Bulent; Alp, Ahmet; Turan, Davut; Mutlu, Tanju; Kaya, Cuneyt; Ozelci, Dursun
The fish passage performance and flow structure of a brush fish pass were investigated at the ncirli Small Hydropower Plant on the yidere River, located in the East Black Sea region of Turkey. The spatial distributions of velocity vectors, power velocity, Froude number and turbulent kinetic energy are presented. The flow is quasi-uniform and subcritical, which provides different migration corridors with favourable hydraulic conditions; importantly for the fish, these corridors continue through the complete fish pass. The flow-bristle interaction creates a reduced velocity and low-turbulence resting zones. In addition, the passage efficiency of the brush fish pass was assessed using passive integrated transponder telemetry. The results clearly showed that upstream passage efficiency differs between fish species: Salmo coruhensis performed better than Alburnoides fasciatus on the same fish passage. The passage efficiency for the target fish species S. coruhensis was calculated to be 82.4%. The data revealed that the brush fish passage provides passage for small-bodied fish (total body length <15 cm) in a high-gradient channel with a slope of 10%. The monitoring data revealed that bristles as flexible hydraulic elements are beneficial for migrating fish.
Flow structure and fish passage performance of a brush-type fish way: a field study in the yidere River, Turkey
(Csiro Publishing, 2019) Küçükali, Serhat; Verep, Bülent; Alp, Ahmet; Turan, Davut; Mutlu, Tanju; Kaya, Cüneyt; Yıldırım, Yasin; Töreyin, Behçet Uğur; Özelçi, Dursun
The fish passage performance and flow structure of a brush fish pass were investigated at the ncirli Small Hydropower Plant on the yidere River, located in the East Black Sea region of Turkey. The spatial distributions of velocity vectors, power velocity, Froude number and turbulent kinetic energy are presented. The flow is quasi-uniform and subcritical, which provides different migration corridors with favourable hydraulic conditions; importantly for the fish, these corridors continue through the complete fish pass. The flow-bristle interaction creates a reduced velocity and low-turbulence resting zones. In addition, the passage efficiency of the brush fish pass was assessed using passive integrated transponder telemetry. The results clearly showed that upstream passage efficiency differs between fish species: Salmo coruhensis performed better than Alburnoides fasciatus on the same fish passage. The passage efficiency for the target fish species S. coruhensis was calculated to be 82.4%. The data revealed that the brush fish passage provides passage for small-bodied fish (total body length <15 cm) in a high-gradient channel with a slope of 10%. The monitoring data revealed that bristles as flexible hydraulic elements are beneficial for migrating fish.
Citation - WoS: 15
Citation - Scopus: 14
Free Vibration Analysis of Carbon Nanotubes by Using Finite Element Method
(Springer, 2016) Dinckal, C.
In the present study, an efficient and accurate finite element model for vibration analysis of carbon nanotubes (CNTs) with both Euler-Bernoulli and Timoshenko beam theory has been presented. For this purpose, an analytical solution for the exact dynamic shape functions of CNTs based on both Euler-Bernoulli and Timoshenko beam theories has been derived. The solution is general and is not restricted to a particular range of magnitudes of the nonlocal parameters. The exact dynamic shape functions have been utilized to derive analytic expressions for the coefficients of the exact dynamic (frequency-dependent) element stiffness matrix. Numerical results are presented to figure out the effects of nonlocal parameter, mode number and slenderness ratio on the vibration characteristics of CNTs. It is shown that these results are in good agreement with those reported in the literature. Present element formulation will be useful for structural analyses of nanostructures with complex geometries, loadings, material properties and boundary conditions.
High-velocity impact of large caliber tungsten projectiles on ordinary Portland and calcium aluminate cement based HPSFRC and SIFCON slabs. Part I: experimental investigations
(Techno-Press, 2011) Polat, Gülkan; Korucu, Hasan
Impact experiments have been carried out on concrete slabs. The first group was traditionally manufactured, densely reinforced concrete targets, and the next were ordinary Portland and calcium aluminate cement based HPSFRC (High performance steel fiber reinforced concrete) and SIFCON (Slurry infiltrated concrete) targets. All specimens were hit by anti-armor tungsten projectiles at a muzzle velocity of over 4 Mach causing destructive perforation. In Part I of this article, production and experimental procedures are described. The first group of specimens were ordinary CEM I 42.5 R cement based targets including only dense reinforcement. In the second and third groups, specimens were produced using CEM I 42.5 R cement and Calcium Aluminate Cement (CAC40) with ordinary reinforcement and steel fibers 2 percent in volume. In the fourth group, SIFCON specimens including 12 percent of steel fibers without reinforcement were tested. A high-speed camera was used to capture impact and residual velocities of the projectile. Sample tests were performed to obtain mechanical properties of the materials. In the companion Part II of this study, numerical investigations and simulations performed will be presented. Few studies exist that examine high-velocity impact effects on CAC40 based HPSFRC targets, so this investigation gives an insight for comparison of their behavior with Portland cement based and SIFCON specimens
Citation - WoS: 1
Citation - Scopus: 2
Hydraulics of Circular Bottom Intake Orifices
(Wiley, 2021) Gogus, Mustafa; Bulut, Muhammed; Ucar, Muhammed
In this study, the hydraulic characteristics of circular bottom intake orifices were investigated in a hydraulic model. The structure diverts the river-flow to a hydroelectric power plant through circular orifices located at the bottom of the channel. In the model, a series of circular holes of various diameters and locations at the bottom of a channel in the form of single and multiple holes were tested for different flowrates and screen angles (theta) to determine the flow diverting capacity of them. Discharges passing through orifices at known locations (x) and diameters (d) and screen slopes (theta) were measured and recorded along with the related main channel flow rates and depths (h). Using the dimensional analysis approach, an expression for the flow rate diverted from the main channel was derived as a function of related parameters, and their variations with each other were presented graphically and empirical equations were determined. Referring to the graphs and empirical equations, one can determine the discharge capacity of single and multiple intake orifices, which is important to calculate the amount of flow to be diverted from the main channel within the ranges of the related parameters used in this study.

Browse

Browsing İnşaat Mühendisliği Bölümü Yayın Koleksiyonu by Scopus Q "Q2"