Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/8651
Browse
9 results
Search Results
Article Citation - WoS: 52Citation - Scopus: 54Numerical Simulation of Mixed Convection Squeezing Flow of a Hybrid Nanofluid Containing Magnetized Ferroparticles in 50%:50% of Ethylene Glycol-Water Mixture Base Fluids Between Two Disks With the Presence of a Non-Linear Thermal Radiation Heat Flux(Frontiers Media Sa, 2020) Khan, Umair; Zaib, A.; Khan, Ilyas; Baleanu, Dumitru; Nisar, Kottakkaran SooppyFerroliquids are an example of a colloidal suspension of magnetic nanomaterials and regular liquids. These fluids have numerous applications in medical science such as cell separation, targeting of drugs, magnetic resonance imaging, etc. The hybrid nanofluid is composed by scattering the magnetic nanomaterial of more than one type nanoparticles suspended into the base fluid. It has different scientific applications such as heat dissipation, dynamic sealing, damping, etc. Owing to the vast ferrofluid applications, the time-dependent squeezed flow of hybrid ferroliquids under the impact of non-linear radiation and mixed convection within two disks was explored for the first time in this analysis. Here, the cobalt and magnetite ferrofluids are considered and scattered in a 50%:50% mixture of water-EG (ethylene glycol). The similarity technique is used to reduce the leading PDEs into coupled non-linear ODEs. The transmuted equations together with recommended boundary restrictions are numerically solved via Matlab solver bvp4c. The opposing and assisting flows are considered. The impacts of an emerging parameter on fluid velocity and temperature field of hybrid ferroliquids are examined through the different graphical aids. The results showed that the opposite trend is scrutinized due to the magnetic influence on the temperature and velocity in the case of assisting and opposing flows. The velocity augments due to the volume fraction of nanoparticles in the assisting flow and declines in the opposing flow, while the opposite direction is noticed in the temperature field.Article Citation - WoS: 1Citation - Scopus: 1Analysis of Positive Measure Reducibility for Quasi-Periodic Linear Systems Under Brjuno-Russmann Condition(Amer inst Mathematical Sciences-aims, 2022) Ismaeel, Tariq; Ahmad, Riaz; Khan, Ilyas; Baleanu, Dumitru; Afzal, MuhammadIn this article, we discuss the positive measure reducibility for quasi-periodic linear systems close to a constant which is defined as: dx/dt = (A(lambda) + Q(phi, lambda))x, (phi) over dot = omega, where omega is a Brjuno vector and parameter lambda is an element of (a, b). The result is proved by using the KAM method, Brjuno-Russmann condition, and non-degeneracy condition.Article Numerical Simulation of Mixed Convection Squeezing Flow of a Hybrid Nanofluid Containing Magnetized Ferroparticles in 50%:50% of Ethylene Glycol–Water Mixture Base Fluids Between Two Disks With the Presence of a Non-linear Thermal Radiation Heat Flux(Frontiers Media SA, 2020) Nisar, Kottakkaran Sooppy; Khan, Umair; Zaib, A.; Khan, Ilyas; Baleanu, DumitruFerroliquids are an example of a colloidal suspension of magnetic nanomaterials and regular liquids. These fluids have numerous applications in medical science such as cell separation, targeting of drugs, magnetic resonance imaging, etc. The hybrid nanofluid is composed by scattering the magnetic nanomaterial of more than one type nanoparticles suspended into the base fluid. It has different scientific applications such as heat dissipation, dynamic sealing, damping, etc. Owing to the vast ferrofluid applications, the time-dependent squeezed flow of hybrid ferroliquids under the impact of non-linear radiation and mixed convection within two disks was explored for the first time in this analysis. Here, the cobalt and magnetite ferrofluids are considered and scattered in a 50%:50% mixture of water–EG (ethylene glycol). The similarity technique is used to reduce the leading PDEs into coupled non-linear ODEs. The transmuted equations together with recommended boundary restrictions are numerically solved via Matlab solver bvp4c. The opposing and assisting flows are considered. The impacts of an emerging parameter on fluid velocity and temperature field of hybrid ferroliquids are examined through the different graphical aids. The results showed that the opposite trend is scrutinized due to the magnetic influence on the temperature and velocity in the case of assisting and opposing flows. The velocity augments due to the volume fraction of nanoparticles in the assisting flow and declines in the opposing flow, while the opposite direction is noticed in the temperature field. © Copyright © 2020 Nisar, Khan, Zaib, Khan and Baleanu.Article Citation - WoS: 30Citation - Scopus: 44Lie Analysis, Conservation Laws and Travelling Wave Structures of Nonlinear Bogoyavlenskii-Kadomtsev Equation(Elsevier, 2020) Hussain, Amjad; Junaid-U-Rehman, M.; Khan, Ilyas; Baleanu, Dumitru; Nisar, Kottakkaran Sooppy; Jhangeer, AdilIn this paper, the Bogoyavlenskii-Kadomtsev-Petviashvili (BKP) equation is taken into consideration by means of Lie symmetry analysis. Infinitesimal generators are computed under the invariance criteria of Lie groups and symmetry group for each generator is reported. Henceforth, conjugacy classes of abelian algebra are used to find the similarity reductions, which convert the considered equation into ordinary differential equations (ODEs). Further, these ODEs are taken into consideration, and travelling wave structures are computed by applying different techniques. Moreover, the discussed model is discussed by means of nonlinear selfadjointness and conservation laws are derived for each Lie symmetry generator. For specific values of the physical parameters of the equation under discussion, the graphical behaviour of some solutions is depicted.Article Citation - WoS: 9Citation - Scopus: 14Finite Element Least Square Technique for Newtonian Fluid Flow Through a Semicircular Cylinder of Recirculating Region Via Comsol Multiphysics(Hindawi Ltd, 2020) Memon, Abid A.; Memon, M. Asif; Bhatti, Kaleemullah; Shaikh, Gul M.; Baleanu, Dumitru; Alhussain, Ziyad A.; Khan, IlyasThis article aims to study Newtonian fluid flow modeling and simulation through a rectangular channel embedded in a semicircular cylinder with the range of Reynolds number from 100 to 1500. The fluid is considered as laminar and Newtonian, and the problem is time independent. A numerical procedure of finite element's least Square technique is implemented through COMSOL multiphysics 5.4. The problem is validated through asymptotic solution governed through the screen boundary condition. The vortex length of the recirculating region formed at the back of the cylinder and orientation of velocity field and pressure will be discussed by three horizontal and four vertical lines along the recirculating region in terms of Reynolds number. It was found that the two vortices of unequal size have appeared and the lengths of these vortices are increased with the increase Reynolds number. Also, the empirical equations through the linear regression procedure were determined for those vortices. The orientation of the velocity magnitude as well as pressure along the lines passing through the center of upper and lower vortices are the same.Article Citation - WoS: 52Citation - Scopus: 60Dual Similarity Solutions of Mhd Stagnation Point Flow of Casson Fluid With Effect of Thermal Radiation and Viscous Dissipation: Stability Analysis(Nature Portfolio, 2020) Omar, Zurni; Khan, Ilyas; Baleanu, Dumitru; Nisar, Kottakkaran Sooppy; Lund, Liaquat AliIn this paper, the rate of heat transfer of the steady MHD stagnation point flow of Casson fluid on the shrinking/stretching surface has been investigated with the effect of thermal radiation and viscous dissipation. The governing partial differential equations are first transformed into the ordinary (similarity) differential equations. The obtained system of equations is converted from boundary value problems (BVPs) to initial value problems (IVPs) with the help of the shooting method which then solved by the RK method with help of maple software. Furthermore, the three-stage Labatto III-A method is applied to perform stability analysis with the help of a bvp4c solver in MATLAB. Current outcomes contradict numerically with published results and found inastounding agreements. The results reveal that there exist dual solutions in both shrinking and stretching surfaces. Furthermore, the temperature increases when thermal radiation, Eckert number, and magnetic number are increased. Signs of the smallest eigenvalue reveal that only the first solution is stable and can be realizable physically.Article Citation - WoS: 19Citation - Scopus: 22Analysis of the Physical Behavior of the Periodic Mixed-Convection Flow Around a Nonconducting Horizontal Circular Cylinder Embedded in a Porous Medium(Hindawi Ltd, 2021) Ullah, Zia; Zia, Saqib; Alharbi, Sayer O.; Baleanu, Dumitru; Khan, Ilyas; Ashraf, MuhammadAn oscillatory mixed-convection fluid flow mechanism across a nonconducting horizontal circular cylinder embedded in a porous medium has been computed. For this purpose, a model in the form of partial differential equations is formulated, and then, the governing equations of the dimensionless model are transformed into the primitive form for integration by using primitive variable formulation. The impact of emerging parameters such as porous medium parameter Omega, Richardson number lambda, magnetic force parameter xi, and Prandtl number Pr on skin friction, heat transfer, and current density is interpreted graphically. It is demonstrated that accurate numerical results can be obtained by the present method by treating nonoscillating and oscillating parts of coupled partial differential equations simultaneously. In this study, it is well established that the transient convective heat transfer, skin friction, and current density depend on amplitude and phase angle. One of the objects of the present study is to predict the mechanism of heat and fluid flow around different angles of a nonconducting horizontal circular cylinder embedded in a porous medium.Article Citation - WoS: 6Citation - Scopus: 9Structure Preserving Algorithms for Mathematical Model of Auto-Catalytic Glycolysis Chemical Reaction and Numerical Simulations(Springer Heidelberg, 2020) Ahmed, Nauman; Rafiq, Muhammad; Baleanu, Dumitru; Rehman, Muhammad Aziz-ur; Khan, Ilyas; Ali, Mubasher; Nisar, Kottakkaran SooppyThis paper aims to develop positivity preserving splitting techniques for glycolysis reaction-diffusion chemical model. The positivity of state variables in the glycolysis model is an essential property that must be preserved for all choices of parameters. We propose two splitting methods that remain dynamically consistent with the continuous glycolysis reaction-diffusion model. The proposed methods converge to a true steady-state or fixed point under the given condition. On contrary to the classical operator splitting finite difference methods, we use nonstandard finite difference theory to propose a new class of operator splitting techniques.Article Citation - WoS: 39Citation - Scopus: 38Comparative Investigation on Mhd Nonlinear Radiative Flow Through a Moving Thin Needle Comprising Two Hybridized Aa7075 and Aa7072 Alloys Nanomaterials Through Binary Chemical Reaction With Activation Energy(Elsevier, 2020) Zaib, A.; Khan, Ilyas; Baleanu, Dumitru; Sherif, El-Sayed M.; Khan, UmairThe intention of the current study is analyzing the significance of nonlinear radiation on magnetic field involving hybrid AA7075 and AA7072 alloys nanomaterials through thin needle. The scenario has been modeled mathematically by captivating the binary chemical reaction and activation energy. Similarity variables are deployed to change the system of PDE's into nonlinear ODE's and subsequently solved these equations through bvp4c solver. Influence of distinct material parameters on the velocity, concentration and temperature along with the correlated engineering features quantities such as drag force, heat and mass transfer rate are obtained and demonstrated via plots. The velocity of the liquid is declining function of magnetic field, while the temperature augments. In addition, obtained numerical results are contrasted through the available literature and appeared to be in admirable harmony. The current investigation shows the important features in solar hybrid alloy nano materials systems and aircraft technology. (C) 2020 The Authors. Published by Elsevier B.V.