Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/8651
Browse
6 results
Search Results
Article Prediction of Noise Generated by Rod-Airfoil Configuration: an Investigation Based on Experiments and Machine Learning(Sage Publications Ltd, 2024) Kocak, Eyup; Ayli, EceThis study investigated the effects of various parameters on the SPL (Sound Pressure Level) levels of rod-airfoil configurations. An experimental study was performed to investigate the effects of the rod parameters, such as the configuration of the rod, the distance between the rod and the airfoil, the diameter effect of the rod, and the geometry of the rod, on the performance of the rod-airfoil configuration. An Artificial Neural Network (ANN) model was then developed and applied to accurately predict the SPL of rod-airfoil configurations. The results of the study revealed that the Levenberg-Marquardt (LM) algorithm with 2 hidden neurons produced the best performance in predicting the SPL level, with a training R-squared value of 0.9998 and a testing R-squared value of 0.998715. The findings also indicated that increasing rod diameter increases sound pressure level while reducing gap width increases SPL levels and decreases frequency values. This method offers a more precise and effective technique to forecast the SPL levels of rod-airfoil designs, allowing designers to enhance their creations and lower noise levels. The findings of this study can also be utilized to direct future research in this area and offer important information for a better understanding of the mechanism of rod-airfoil noise creation. To the best of the authors' knowledge, this is the first study to look into rod-airfoil design predictions made using machine learning approaches.Article Citation - WoS: 5Citation - Scopus: 6Prediction of the Heat Transfer Performance of Twisted Tape Inserts by Using Artificial Neural Networks(Korean Soc Mechanical Engineers, 2022) Kocak, Eyup; Ayli, EceA numerical study is undertaken to investigate the effect of twisted tape inserts on heat transfer. Twisted tapes with various aspect ratios and single, double, and triple inserts are placed inside a tube for Reynolds numbers ranging from 8000 to 12000. Numerical results show that the tube with a twisted tape and different numbers of tape is more effective than the smooth tube in terms of thermo-hydraulic performance. The highest heat transfer is achieved with the triple insert, with the highest turning number and an increment of 15 %. Then, an artificial neural network (ANN) model with a three-layer feedforward neural network is adopted to obtain the Nusselt number on the basis of four inputs for a heated tube with a twisted insert. Several configurations of the neural network are examined to optimize the number of neurons and to identify the most appropriate training algorithm. Finally, the best model is determined with one hidden layer and thirteen neurons in the layer. Bayesian regulation is chosen as the training algorithm. With the optimized algorithm, excellent precision for measuring the output is provided, with R2 = 0.97043. In addition, the optimized ANN architecture is applied to similar studies in the literature to predict the heat transfer performance of twisted tapes. The developed ANN architecture can predict the heat transfer enhancement performance of similar problems with R2 values higher than 0.93.Article Citation - WoS: 8Citation - Scopus: 8Supervised Learning Method for Prediction of Heat Transfer Characteristics of Nanofluids(Korean Soc Mechanical Engineers, 2023) Kocak, Eyup; Ayli, EceThis study focuses on the alication and investigation of the predictive ability of artificial intelligence in the numerical modelling of nanofluid flows. Numerical and experimental methods are powerful tools from an accuracy point of view, but they are also time- and cost-consuming methods. Therefore, using soft-computing techniques can improve such CFD drawbacks by patterning the CFD data. After obtaining the aropriate ANN and ANFIS architecture using the CFD data, many new data can be created without requiring numerical and experimental methods. In the scope of this research, the FCM-ANFIS and ANN methods are used to predict the thermal behaviour of the turbulent flow in a heated pipe with several nanoparticles. A parametric CFD study is carried out for water-TiO2, water-CuO, and water-SiO2 nanofluid through a pipe. The Reynolds number is varied between 7000 and 15000, and the nanofluid concentration is varied between 0.25 % and 4 %. The effects of using nanofluid on local values of Nusselt number and shear stress distribution were investigated. Numerical results indicate that with the increasing nanoparticle volume fraction of nanofluid, the average Nusselt number increases, but the required pumping power also increases. The obtained soft computing results demonstrate that the FCM clustering ANFIS has given better results both in training and testing when it is compared to the ANN architecture with an R-2 of 0.9983. Regarding this, the FCM-ANFIS is an excellent candidate for calculating the Nusselt number in heat transfer problems.Article Citation - WoS: 6Citation - Scopus: 7Machine Learning Based Developing Flow Control Technique Over Circular Cylinders(Asme, 2023) Turkoglu, Hasmet; Ayli, Ece; Kocak, EyupThis paper demonstrates the feasibility of blowing and suction for flow control based on the computational fluid dynamics (CFD) simulations at a low Reynolds number flows. The effects of blowing and suction position, and the blowing and suction mass flowrate, and on the flow control are presented in this paper. The optimal conditions for suppressing the wake of the cylinder are investigated by examining the flow separation and the near wake region; analyzing the aerodynamic force (lift and drag) fluctuations using the fast Fourier transform (FFT) to separate the effects of small-scale turbulent structures in the wake region. A method for stochastic analysis using machine learning techniques is proposed. Three different novel machine learning methods were applied to CFD results to predict the variation in drag coefficient due to the vortex shedding. Although, the prediction power of all the methods utilized is in the acceptable accuracy range, the Gaussian process regression (GPR) method is more accurate with an R-2(coefficient of determination) > 0.95. The results indicate that by optimizing the blowing and suction parameters like mass flowrate, slot location, and the slot configuration, up to 20% reduction can be achieved in the drag coefficient.Article Citation - WoS: 16Citation - Scopus: 17A Comparative Study of Multiple Regression and Machine Learning Techniques for Prediction of Nanofluid Heat Transfer(Asme, 2022) Ayli, Ece; Turkoglu, Hasmet; Kocak, EyupThe aim of this article is to introduce and discuss prediction power of the multiple regression technique, artificial neural network (ANN), and adaptive neuro-fuzzy interface system (ANFIS) methods for predicting the forced convection heat transfer characteristics of a turbulent nanofluid flow in a pipe. Water and Al2O3 mixture is used as the nanofluid. Utilizing fluent software, numerical computations were performed with volume fraction ranging between 0.3% and 5%, particle diameter ranging between 20 and 140 nm, and Reynolds number ranging between 7000 and 21,000. Based on the computationally obtained results, a correlation is developed for the Nusselt number using the multiple regression method. Also, based on the computational fluid dynamics results, different ANN architectures with different number of neurons in the hidden layers and several training algorithms (Levenberg-Marquardt, Bayesian regularization, scaled conjugate gradient) are tested to find the best ANN architecture. In addition, ANFIS is also used to predict the Nusselt number. In the ANFIS, number of clusters, exponential factor, and membership function (MF) type are optimized. The results obtained from multiple regression correlation, ANN, and ANFIS were compared. According to the obtained results, ANFIS is a powerful tool with a R-2 of 0.9987 for predictions.Article Citation - WoS: 17Citation - Scopus: 17Developing and Implementation of an Optimization Technique for Solar Chimney Power Plant With Machine Learning(Asme, 2021) Kocak, Eyup; Bayer, Ozgur; Beldek, Ulas; Yapic, Ekin Ozgirgin; Ayli, Ece; Ulucak, Oguzhan; Yapici, Ekin ÖzgirginGreen energy has seen a huge surge of interest recently due to various environmental and financial reasons. To extract the most out of a renewable system and to go greener, new approaches are evolving. In this paper, the capability of Artificial Neural Network and Adaptive Neuro-Fuzzy Inference System in geometrical optimization of a solar chimney power plant (SCPP) to enhance generated power is investigated to reduce the time cost and errors when optimization is performed with numerical or experimental methods. It is seen that both properly constructed artificial neural networks (ANN) and adaptive-network-based fuzzy inference system (ANFIS) optimized geometries give higher performance than the numerical results. Also, to validate the accuracy of the ANN and ANFIS predictions, the obtained results are compared with the numerical results. Both soft computing methods over predict the power output values with MRE values of 12.36% and 7.25% for ANN and ANFIS, respectively. It is seen that by utilizing ANN and ANFIS algorithms, more power can be extracted from the SCPP system compared to conventional computational fluid dynamics (CFD) optimized geometry with trying a lot more geometries in a notably less time when it is compared with the numerical technique. It is worth mentioning that the optimization method that is developed can be implemented to all engineering problems that need geometric optimization to maximize or minimize the objective function.