Makine Mühendisliği Bölümü Yayın Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/263
Browse
78 results
Search Results
Article Citation - WoS: 1Numerical Analysis of Pulsating Circular Impinging Laminar Jet on a Planar Disc(Turkish Soc thermal Sciences Technology, 2017) Kahroba, Mitra; Türkoğlu, Haşmet; Turkoglu, Hasmet; Makine MühendisliğiIn this study, the flow and heat transfer characteristics of pulsating circular air jets impinging on a flat surface were numerically analyzed. The jet velocity pulsated in time. The objective of the work is to investigate the influence of the jet Reynolds number, pulsation amplitude and pulsation frequency on the rate of heat transfer from the target hot surface. For the analysis, a computer program, based on the control volume method and SIMPLE algorithm, was developed. Laminar flow with the time averaged jet Reynolds numbers between 300 and 700 were analyzed. The pulsation amplitude is ranged between 0.0V(0) (steady jet) and 0.8V(0) (m/s) (V-0 is period averaged jet velocity), and the frequency is ranged between 1 and 6 Hz. The nozzle-to-plate distance was kept constant at H/d=3. From the simulation results, it was observed that at any instant of the pulsation period, the local Nusselt number is maximum at the stagnation point, and it decreases along the plate. This decrease in the local Nusselt number is not monatomic as in the steady jet cases. It has local maximum and minimum values (fluctuations) due to the moving recirculating flow regions along the bottom plate. At low frequencies, the time (period) averaged stagnation point Nusselt numbers are lower than the corresponding steady jet Nusselt numbers. However, with the increasing frequency, the stagnation point Nusselt number increases and become higher than the steady jet Nusselt number.Conference Object Fluorescent On-Chip Imager by Using a Tunable Absorption Filter(Ieee, 2017) Arpali, Caglar; Yıldırım, Ender; Yildirim, Ender; Arpali, Çağlar; Arpali, Serap Altay; Arpali, Serap; Makine Mühendisliği; Mekatronik Mühendisliği; Elektronik ve Haberleşme MühendisliğiConference Object Citation - WoS: 12Citation - Scopus: 13A Reconfigurable Microfluidic Transmitarray Unit Cell(Ieee, 2013) Erdil, Emre; Yıldırım, Ender; Topalli, Kagan; Zorlu, Ozge; Toral, Taylan; Yildirim, Ender; Kulah, Haluk; Civi, Ozlem Aydin; Makine MühendisliğiThis paper presents a novel microfluidics based approach to develop a reconfigurable circularly polarized transmitarray unit cell. The unit cell comprises double layer nested split ring slots formed as microfluidic channels that can be filled by fluids. Split regions in the slots are realized by injecting liquid metal into the channels. Beam steering is obtained by implementing rotational phase shifting via manipulating the liquid metal in the slots. X-band unit cell prototypes are fabricated on glass substrate carrying a patterned metal film, and the slot channels are formed by Polydimethylsiloxane (PDMS) using soft lithography techniques.Book Part Clean Energy Generation in Residential Green Buildings(inst Engineering Tech-iet, 2019) Aylı, Ülkü Ece; Yapici, Ekin Ozgirgin; Ayli, Ece; Makine MühendisliğiDue to the recent investigations, buildings consume a considerable amount of the electricity, drinking water, global final energy use and as a result are responsible for one third of the global carbon emissions. Therefore, building sector has a key role to reach global energy targets. In this sight, this study draws attention to the sustainable energy performances of green buildings (GBs) and aims towards the GBs concept which includes renewable sources in the construction and lifetime utilization. The remainder of the chapter is subjected as follows: Section 2.1 gives a brief information about residential GBs, and in Section 2.2, certification systems for sustainability ratings of residential GBs are given. This is followed by case studies related to the certification systems in Section 2.3 part. In Section 2.4, GBs incentives are summarized. Section 2.5 provides information about energy demand modelling for residential GBs, and in Section 2.6, clean energy generation systems in residential GBs are described in detail. Finally, outlook for the works that is performed up to now and the outlook for the future is given.Article Citation - Scopus: 5Fused Filament Fabrication in Cad Education: a Closed-Loop Approach(Sage Publications inc, 2025) Totuk, Onat Halis; Selvi, Ozguen; Akar, SametIntegrating low-cost fused filament fabrication 3D printing as a foundation for learning 3D modelling is explored. This method blends traditional computer aided design (CAD) instruction with additive manufacturing possibilities. Experimental results demonstrate increased comprehension speed and reduced learning time. This hands-on approach empowers students by enabling direct engagement with the modelling process. Analogous to reverse engineering, the strategy instructs engineering students from final product to model creation, closing the gap between theory and practice. Incorporating 3D printing bridges this divide, enhancing understanding, creativity and problem-solving. The study underscores technology's influence on learning strategies, aligning with the surge of 3D printing in education. Results link advanced design technology usage to improved student performance, with 3D-printed materials yielding 45% higher grades and 30% faster task completion. This study advocates curricular advancement for design-focused careers through enhanced technology integration and favourable 3D printing model reception.Article Citation - WoS: 2Citation - Scopus: 1Exploring the Potential of Artificial Intelligence Tools in Enhancing the Performance of an Inline Pipe Turbine(Sage Publications Ltd, 2024) Celebioglu, Kutay; Ayli, Ece; Cetinturk, Huseyin; Tascioglu, Yigit; Aradag, SelinIn this study, investigations were conducted using computational fluid dynamics (CFD) to assess the applicability of a Francis-type water turbine within a pipe. The objective of the study is to determine the feasibility of implementing a turbine within a pipe and enhance its performance values within the operating range. The turbine within the pipe occupies significantly less space in hydroelectric power plants since a spiral casing is not used to distribute the flow to stationary vanes. Consequently, production and assembly costs can be reduced. Hence, there is a broad scope for application, particularly in small and medium-scale hydroelectric power plants. According to the results, the efficiency value increases on average by approximately 1.5% compared to conventional design, and it operates with higher efficiencies over a wider flow rate range. In the second part of the study, machine learning was employed for the efficiency prediction of an inline-type turbine. An appropriate Artificial Neural Network (ANN) architecture was initially obtained, with the Bayesian Regularization training algorithm proving to be the best approach for this type of problem. When the suitable ANN architecture was utilized, the prediction was found to be in good agreement with CFD, with an root mean squared error value of 0.194. An R2 value of 0.99631 was achieved with the appropriate ANN architecture.Article Citation - WoS: 10Citation - Scopus: 11Analysis of Heat Transfer Enhancement of Passive Methods in Tubes With Machine Learning(Sage Publications Ltd, 2024) Ayli, Ece; Turkoglu, Hasmet; Yapici, Ekin Ozgirgin; Özgirgin Yapıcı, EkinThis study investigates the efficacy of machine learning techniques and correlation methods for predicting heat transfer performance in a dimpled tube under varying flow conditions, including the presence of nanoparticles. A comprehensive numerical analysis involving 120 cases was conducted to obtain Nusselt numbers and friction factors, considering different dimple depths and velocities for both pure water and water-Al2O3 nanofluid at 1%, 2%, and 3% volume concentrations. Utilizing the data acquired from the numerical simulations, a correlation equation, SVM ANN architectures were developed. The predictive capabilities of the statistical approach, ANN, and SVM models for Nusselt number distribution and friction factor were meticulously assessed through mean average percentage error (MAPE) and correlation coefficients (R2). The research findings reveal that machine learning techniques offer a highly effective approach for accurately predicting heat transfer performance in a dimpled tube, with results closely aligned with Computational Fluid Dynamics (CFD) simulations. Particularly noteworthy is the superior performance of the ANN model, demonstrating the most precise predictions with an error rate of 2.54% and an impressive R2 value of 0.9978 for Nusselt number prediction. In comparison, the regression model achieved an average error rate of 6.14% with an R2 value of 0.8623, and the SVM model yielded an RMSE value of 2.984% with an R2 value of 0.9154 for Nusselt number prediction. These outcomes underscore the ANN model's ability to effectively capture complex patterns within the data, resulting in highly accurate predictions. In conclusion, this research showcases the promising potential of machine learning techniques in accurately forecasting heat transfer performance in dimpled tubes. The developed ANN model exhibits notable superiority in predicting Nusselt numbers, making it a valuable tool for enhancing thermal system analyses and engineering design optimization.Article Citation - WoS: 13Citation - Scopus: 14A Novel Cfd-Ann Approach for Plunger Valve Optimization: Cost-Effective Performance Enhancement(Elsevier Sci Ltd, 2024) Kaak, Abdul Rahman Sabra; Celebiog, Kutay; Bozkus, Zafer; Ulucak, Oguzhan; Ayli, Ece; Çelebioğlu, KutayThis paper introduces a novel computational fluid dynamics-artificial neural network (CFD-ANN) approach that has been devised to enhance the efficiency of plunger valves. The primary emphasis of this research is to achieve an optimal equilibrium between hydraulic flow and geometric configuration. This study is a novel contribution to the field as it explores the flow dynamics of plunger valves using Computational Fluid Dynamics (CFD) and proposes a unique methodology by incorporating Machine Learning (ML) for performance forecasting. An artificial neural network (ANN) architecture was developed using a thorough comprehension of flow physics and the impact of geometric parameters acquired through computational fluid dynamics (CFD). Using optimization, the primary aspects of the Artificial Neural Network (ANN), including the learning algorithm and the number of hidden layers, have been modified. This refinement has resulted in the development of an architecture exhibiting a remarkably high R2 value of 0.987. This architectural design was employed to optimize the plunger valve. By utilizing Artificial Neural Networks (ANN), a comprehensive analysis comprising 1000 distinct configurations was effectively performed, resulting in a significant reduction in time expenditure compared to relying on Computational Fluid Dynamics (CFD). The result was a refined arrangement that achieved maximum head loss, subsequently verified using computational fluid dynamics (CFD) simulations, resulting in a minimal discrepancy of 2.66%. The efficacy of artificial neural networks (ANN) becomes apparent due to their notable cost-efficiency, along with their capacity to produce outcomes that are arduous and expensive to get through conventional optimization research utilizing computational fluid dynamics (CFD).Article Citation - WoS: 5Citation - Scopus: 6Prediction of the Heat Transfer Performance of Twisted Tape Inserts by Using Artificial Neural Networks(Korean Soc Mechanical Engineers, 2022) Kocak, Eyup; Ayli, EceA numerical study is undertaken to investigate the effect of twisted tape inserts on heat transfer. Twisted tapes with various aspect ratios and single, double, and triple inserts are placed inside a tube for Reynolds numbers ranging from 8000 to 12000. Numerical results show that the tube with a twisted tape and different numbers of tape is more effective than the smooth tube in terms of thermo-hydraulic performance. The highest heat transfer is achieved with the triple insert, with the highest turning number and an increment of 15 %. Then, an artificial neural network (ANN) model with a three-layer feedforward neural network is adopted to obtain the Nusselt number on the basis of four inputs for a heated tube with a twisted insert. Several configurations of the neural network are examined to optimize the number of neurons and to identify the most appropriate training algorithm. Finally, the best model is determined with one hidden layer and thirteen neurons in the layer. Bayesian regulation is chosen as the training algorithm. With the optimized algorithm, excellent precision for measuring the output is provided, with R2 = 0.97043. In addition, the optimized ANN architecture is applied to similar studies in the literature to predict the heat transfer performance of twisted tapes. The developed ANN architecture can predict the heat transfer enhancement performance of similar problems with R2 values higher than 0.93.Article Citation - WoS: 1Citation - Scopus: 1Performance Determination of Axial Wind Tunnel Fan With Reverse Engineering, Numerical and Experimental Methods(Asme, 2022) Ayli, Ece; Kocak, EyupIn today's technology, in case of the need for rehabilitation, renovation, or damage, it is necessary to recover the problems quickly with a cost-effective approach. In the case of destructive failure, or misdesign of the devices, replacing the problematic part with the new design is crucial. In order to substitute the related part with the efficient one, reverse engineering (RE) methodology is utilized. In this paper, from the perspective of engineering implementation and based on the idea of reverse engineering, axial wind tunnel fan is rehabilitated using numerical and experimental methods. The current study is focused on an axial pressurization fan placed into Cankaya University Mechanical Engineering Laboratory wind tunnel that has firm guaranteed specifications of 5.55 m(3)/s airflow capacity. The measurements performed during experiments showed that the fan provides less than 60% airflow compared with firm guaranteed specifications. In order to determine the problems of the existing fan, a reverse engineering methodology is developed, and the noncontact data acquisition method is used to form a computer aided drawing (CAD) model. A computational fluid dynamics (CFD) methodology is developed to analyze existing geometry numerically, and results are compared with an experimental study to verify numerical methodology. According to the results, the prediction accuracy of the numerical method can attain 92.95% and 96.38% for flowrate and efficiency, respectively, at the maximum error points.