WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/8653
Browse
4 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 5Ann and Anfis Performance Prediction Models for Francis Type Turbines(Turkish Soc thermal Sciences Technology, 2020) Aylı, Ülkü Ece; Ayli, Ece; Ulucak, Oguzhan; Makine MühendisliğiTurbines can be operated under partial loading conditions due to the seasonal precipitation fluctuations and due to the needed electrical demand over time. According to this partial working need, designers generate hill chart diagrams to observe the system behavior under different flow rates and head values. In order to generate a hill chart, several numerical or experimental studies have been performed at different guide vane openings and head values which are very time consuming and expensive. In this study, the efficiency prediction of Francis turbines has been performed with ANN and ANFIS methods under different operating conditions and compared with simulation results. The obtained results indicate that it is possible to obtain a hill chart using ANFIS method instead of a costly experimental or numerical tests. ANN and ANFIS parameters which effect the output, have been optimized with trying 100 different cases. 75% of the numerical data set is used for training and 25 % is used for validation as testing data. To asses and compare the performance of multiple ANN and ANFIS models several statistical indicators have been used. Insight to the performance evaluation, it is seen that ANFIS can predict the efficiency distribution with higher accuracy than the ANN model. The developed ANFIS model predicts the efficiency with 1.41% mean average percentage error and 0.999 R-2 value. To the best of the author's knowledge, this is the first study in the literature that ANN and ANFIS are used in order to predict the efficiency distribution of the turbines at different loading conditions.Article Machine Learning-Based Efficiency Prediction of Francis Type Hydraulic Turbines Through Comprehensive Performance Testing(Sage Publications Ltd, 2025) Besni, Ferdi; Buyuksolak, Fevzi; Ayli, Ece; Celebioglu, Kutay; Aradag, Selin; Tascioglu, YigitIn this study, the rehabilitation works carried out for the KEPEZ HPP, which has been in operation for over 50 years in Antalya, Turkey, is discussed. Within this scope, the existing turbine components are optimized using the CFD method, and a design that provides higher performance at the required flow rate and head is obtained. Analyses are performed using numerical methods to examine the behavior of the new turbine at different flow rates and heads, and a hill chart is created. In the second stage, model tests are carried out at the TOBB ETU HYDRO Water Turbine Design and Test Center in accordance with IEC60193 standards. Different ML methods are examined for their ability to predict turbine performance, following the development of the hydrid CFD-Experimental methodology. According to the authors knowledge, there is no study in the literature that combines experimental, numerical, and ML methods for turbines, and ML methods have not been applied before for Francis-type turbine performance prediction. The outcomes of the study contribute to the advancement of turbine design and optimization processes, offering valuable insights for the successful implementation of rehabilitation projects in the hydropower sector.Article Citation - WoS: 2Numerical Investigation of Rod-Airfoil Configuration Aeroacoustic Characteristics Using Ffowcs-Williams Equations(Yildiz Technical Univ, 2021) Kocak, Eyup; Turkoglu, Hasmet; Ayli, EceThe rod-airfoil configuration is a fundamental study to understand sound generation processes and the acoustic phenomena in the application of turbines, fans, and airfoils. In the present research, the noise that is originated by the rod-airfoil configuration is examined using numerical methods which are Large Eddy Simulation (LES), and Reynolds Averaged Navier Stokes (RANS) models, coupled with an FFOWCS-WILLIAMS-HAWKINGS (FW-H) technique. For the RANS method, k-omega SST and Spalart Allmaras (S-A) turbulence models are utilized in order to investigate the capability of different models for the analysis of the aeroacoustic flow field. The ANSYS FLUENT solver is chosen to carry out the numerical simulations. The examined rod and chord diameter Reynolds numbers are 48000 and 480000, respectively and the Mach number is 0.2. Results are obtained for both in the near field and acoustic far-field. The obtained numerical results are verified with an experimental study from the literature, and the results of both approaches are compared with each other and the experiment. Comparisons are performed for mean velocity profiles in the rod and airfoil wakes, pressure spectra and power spectral density. The results obtained show that LES is preferable for this problem as it is capable of capturing the flow separation, reattachments, vortex street, and various length scales of turbulence. Although both RANS and LES methods provide a consistent flow field with experimental methods, the RANS approach overestimates the vortex shedding frequency and Strouhal number. The RANS model predicts the flow field well; however, it overestimates the noise spectra. The LES model predicts satisfactory acoustic spectra.Article Citation - WoS: 16Citation - Scopus: 22Cavitation in Hydraulic Turbines(Edizioni Ets, 2019) Ayli, EceHydroenergy is one of the richest and most useful renewable energy sources in the world. Hydropower is a vital source as it is the clean energy source, sustainable and last but not least it is also cost-effective. One of the most important parameters that affect the performance of the hydraulic machines is the cavitation phenomenon, which is defined as the formation of the vapor bubbles in the liquid through any hydraulic turbine. In this paper, hydraulic machines, cavitation, types of cavitation are briefly described. After theoretical studies, analytical and numerical researches about cavitation in hydraulic machinery are discussed extensively. With those studies which are summarized in this paper covers a lot of ground about cavitation on the other hand further studies are needed about cavitation in hydro turbines. Numerical methods provide sufficient predictions for cavitation. However, numerical results should be verified by experimental measurements and detection methods to decide what intensity and which shape of cavitation is hazardous and vital, where the local pressure is lower than the vapor pressure and at which static pressure cavities start to grow and collapse.